Menu
Drosera LPE9 pellet stove
Raise the curtains on the magnificent production of a flaming spectacle! Your Drosera air tight heater will be the star of the show; you will marvel at its very trendy metal covering.
Reference: P640734
Why this product?
Airtight unit RT2012 compatible
Ideal for low-energy consumption construction (BBC) OR RT2012 The unit is equipped with a central fresh air input on a connection nozzle:
* no air intake in the room,
* direct connection possible to crawl space or external air intake.
Can be installed facing front (zone 3 – suction)
Also called the suction exhaust, zone 3 installation does not require an existing chimney flue. The smoke exhaust tubing horizontally to the front. This installation configuration requires a concentric flue and professional advice. Only sealed wood pellet stoves certified by CSTB can be installed in zone 3.
Chrono-thermostat programming
Using the chronothermostat, you can:
* define 3 operating temperatures: comfort, normal, economic,
* set the times for the unit to turn on and off,
* program the wood-burning stove for 24 hours in units of a 1/2 hour, choosing to have the unit turn off or to select one of three pre-defined temperatures,
* set a different schedule for every day of the week.
Combustion Control Kit (CCK)
The KCC is used to adapt the unit to the specifications for wood pellets, such as: the type of installation, altitude, the type of soiling caused by the burner and heat exchanger, to ensure more efficient and better performance over time and to reduce maintenance.
CSTB technical assessment no.14.2/15-2130*V5
The CSTB technical assessment (the French scientific and technical construction center) officially certifies the seal on wood pellet stoves. n°14.2/15-2130*V5
Eco-Stop
When the room temperature exceeds the predefined temperature by +3°C, the unit turns off and enters Eco-Stop mode. The unit leaves Eco-Stop mode and turns on again when the room temperature drops 1°C below the temperature set.
Optional external thermostat control (not included)
Air distribution connection lines are available as an option. Reference P690080: kit 2 connection lines & screws.
Regulate the flame or room temperature
*Adjust operating power: 5 pre-programmed power settings managed automatically.
*Adjust the preset temperature: you choose the desired ambiant temperature in the room. It is measured using a wire probe. The wood pellet stove adjusts its power to reach and maintain the requested value.
Ventilator for hot air output
A tangential forced convection ventilator is used. It distributes the hot air inside the room.
Features
Power
9 kW
Power modulation
3,1 to 9,1 kW
Heat volume
85 to 275 m³
Heating surface
35 to 110 m²
Green flame
7 stars
Efficiency
87 to 90%
CO rate
0.02 to 0.06%
Concentration of powders
23 mg/Nm3
Performance index
0.1
Granules of natural wood
length: 30 mm diameter: 6 mm
Capacity of the shaft
16.5 kg
Consumption
0,7 to 2,17 kg/hour
Minimum autonomy
7 hours
Maximum autonomy
23 hours
Load
Top
Smoke exhaust
Back
Diameter of nozzle
80 mm
Connection of the fresh air circuit
80 mm
Heating element
LPE (modèle de base étanche)
Nominal voltage
230 V
Electric power
350 W on ignition - 90 W in operation
Dimensions
H 1090 x L 550 x W 515 mm
Weight
126 kg
Design
Contemporain
Matter
Steel + Ceramic
Completion
Steel and ceramic coating
Color(s)
Burgundy, Cream
Standard
EN 14785-BlmSchV compliant
Guarantee
2 years
